Sunday, September 9, 2007

Day 2 & 3: We have a problem

Day 2. More or less uneventful. I rode from Alton, ON to Sault Ste. Marie along the lake. Nice ride.

Clutch started occasionally slipping in the low gears at the end of the day. Sometimes got a rattling noise when the clutch wasn't engaged. Hm. Decided to ride day 3 (goal: Winnipeg, Manitoba) in the US rather than in Canada, in case things get worse. Which brings us to ....


Day 3. We have a problem.



Rode roughly 50 miles onto the Upper Peninsula, MI. No rattling, no clutch slipping. Life feeling pretty good.

And then the clutch or the transmission or the final drive failed. Rattling and losing power to the rear wheel whenever the bike exceeds 40 mph or the engine has to put out a significant amount of torque.

I limped my way another 15 miles, to lovely Newberry, MI. Checked into the Best Western. Pulled my starter (pic above), half expecting to see debris in the clutch and flywheel housing behind it, but no debris.

Anyhow, that's academic at the moment. Regardless of whether it's the clutch or whatever else, I can't fix it here. I'll probably rent a truck tomorrow and take it to Nick's BMW in Greenbay. This is going to cost me a couple days and probably more money than I want to think about right now.


>>>NEXT: Day 4 - 7: stuck in Wisconsin!

Saturday, September 8, 2007

Day 1

711 miles, Cambridge, MA to North Hampton, NH to Alton, ON via Niagra

So day 1 was a bit of a rescue mission. Miriam, a good friend of mine who is also doing a Canada ride, ran into some bike problems requiring some new parts. Parts in Canada are apparently hard to find and very expensive, so I stopped by the bike shop in NH that she goes to and delivered them to Alton, a town just north of Toronto where she is staying with friends. The plus side being that I got to stay with some extremely nice Canadians.

But first -- the beginning. Here's my odometer, right before leaving. 41,969 mi.


Not much to see, scenery-wise. I wanted to be quick so it was just a straight shot down the 90 through Massachusetts and New York.


The auxiliary tank is AWESOME. 428 miles before my first refill, and I could have gone another 40. Between that, the new saddle, and the throttle lock (think a poor man's cruise control), the highway miles just flew past. An iPod and good earphones helps too.



43 mpg. Not bad.

Finally, I reached Niagra. I remember the rapids before the Falls frightening me as a child. At night they are even more menacing. Here the Horseshoe Falls are lit by spotlights from the Canadian side.






And entering Canada:



OK, that's all for now. I am being lazy since I have such wonderful hosts here but I need to hit the road!


>>>NEXT: Day 2 & 3 - We have a problem

Friday, September 7, 2007

And we are GO!!!!

I'm hitting the road! (figuratively speaking, of course.) Sadly, without the camera. It was not happy with the motorcycle power supply, despite the big filtering capacitors I put in my controller circuit and on the camera itself. Ah well, something to do for the next trip.

It was a nice thought:


And here's the bike, ready and waiting for me!





Thanks to everyone who wished me off!

>>>NEXT: Day 1

Ready for launch!

OK. It's been quite a process, but I'm ready to go. Leaving at 8:00 am tomorrow. Yes, I said 5 am before, but I have good reason for leaving later. But first ....



That is it. What my past 5 1/2 years at MIT have come down to. The above form indicates that I have turned in my thesis to the physics office, completing all the requirements for my PhD in astrophysics. (Note that "PhD" has been circled, rather than "SM," for a science masters.) Never mind that the above piece of paper could be easily mistaken for a dry cleaning ticket. That is it. And with it, I am done. Summarily cut off of the payroll and sent out the door. Not a moment too soon.

So, with that in hand, I could go about more interesting things. Like this trip. The past couple weeks have involved a lot of bike preparation.

Adding an electrical connection, so that my cell phone and laptop can recharge while I ride:

I also hacked together a power cord and protective case for my Macbook, but it's packed away right now.

Put a 5 gallon auxiliary tank on my bike, right over where the passenger seat would go. I'll take a pic tomorrow before I leave.

Added a headlight guard to protect the glass headlight assembly from rocks on the gravel roads of Alaska. These things cost like $50 -- or you can whip out the trusty Dremel and drill and DIY. Granted, mine looks a wee bit ragged around the edges, but ... meh. It's functional.

Did a little motorcycle-worthy hair styling. BEFORE:

And AFTER:

Again, obviously DIY. Like hell I'm gonna pay someone $15 to buzz my hair.

And finally, I hacked up this old digital camera so that it will (hopefully) take a picture every six seconds while I'm riding. Unfortunately, learning astrophysics seems to have pushed most of the electrical knowledge out of my head -- and I never had much to begin with -- so we'll see how well this thing works. I give it 8 days before it falls apart. That's probably optimistic, but I at least want it to last until Alaska.

So the idea is that the camera will sit behind my windshield, looking forward and taking pictures of the scenery ahead. Taking one picture every six seconds, a time-lapsed movie will compress 2 hours of riding into a minute of video. If this all works, I'll put the time-lapsed movies on youtube. We'll see.

So that's it for prep. The plan:

I'm going to get up to Fairbanks, AK as quickly as possible. Blitz across the Trans-Canada Highway with minimal stops for scenery. At this point, it's late enough in the season that snow starts to be a concern. So I plan to be at Fairbanks in a week. I just got a new (to me) Sargent saddle. I hope it's better than the stocker.

That's all for now. I need to hit it. I'll post a picture of my packed bike tomorrow morning.


(Click on the >>>NEXT links to continue through the story!)

>>>NEXT: And we are GO!!!!

Wednesday, September 5, 2007

Close ... but not quite

OK, one more day. Departure is Friday, 5 am. And that is final. (Note: the previous entry only claimed "some finality" re leaving tomorrow!) But now my bags are pretty much packed, the bike is set up, and so on. I'm ready, or at least I would be with a couple more hours of prep. But I'm planning a long ride the first day, and I want a full night's sleep before it. So: one more day.

STILL in Cambridge!

But I can say with some finality: the departure date is Thursday, September 6, at roughly 5:00 am. I decided that I am on vacation, so I am not rushing anything, not even vacation.

Plus, I got bogged down in a morass of electronics, trying to rig up a digital camera to take a picture every 6 seconds of my trip. So that I could create a time-lapsed video. It would have been very cool. Might still be. But I'm having problems with the camera giving me "low battery warnings." (Despite the fact that it expects 3.7 V and I've given it anywhere between that and 4.5 V. Stupid camera.) So that might not happen. But I bumped it from the priority list, so I'll leave Thursday morning regardless.

Saturday, August 25, 2007

Still in Cambridge

Ahhh, so, about the previous post. You see, "thesis is done" is a complicated statement. There's finishing the thesis, but there's also the minor business of defending, making revisions, and getting out a paper before the trip so it doesn't get scooped by a competitor. Also: applying for postdocs. And don't forget trip preparation.

So I am still in Cambridge. Departure date has been rolled back to Sept. 1. And I've finally conceded that this is now the "fall of freedom" tour. And I've cut out the Florida bit, instead choosing to concentrate mostly on the dirt roads of Canada. I've seen the Eisenhower highway system before, thank you very much.

But trip preparation is well on its way. More details shortly.